• Send Email
  • CALL US | 08046046889
 

Home   Our Products   Plastic Auxiliaries

Hot Air Dryer

      Special Features

  • Insulated container to prevent heat loss
  • Front open able door for easy cleanout
  • Uniform heat distribution
  • Efficient for high temperature drying up till 200°C
  • All material contact points are non-ferrous
  • Equipped with highly isolated blower for long life spam
  • Insulated chamber to prevent heat loss heater
  • Incoloy type tubular heater to achieve set temperature rapidly
  • Viewing window for material level monitoring
  • Equipped with PID controller for delivering accurate temperature
  • High pressure centrifugal with adjustable air damper for appropriate air flow
  • Discharge chamber with removable magnet to prevent flow of ferrous material
  • Drain port in discharge valve for quick change over of material
  • Lightweight & robust construction of equipment suitable for both offline & online application
  • Equipped with audible & visual alarm on faults
  • Over shoot of temperature can be prevented by high heat thermostat
  • Cool down function to avoid lumps formation
  • Digital display for set temperature & actual temperature
  • Overload protection for blower motor
  • Suitable for conveyors and vacuum loaders
 

      Optional Features

  • 24x7 auto start timer
  • Hot air recycler
  • Insulation on cylinder for high temperature application (Above 200°C)
 

Specifications

ModelCapacity (Liters)Height (mm)Width (mm)Depth (mm)Heater Capacity
in KW
Blowing Power
in Watts
Voltage
DHAD-506011107903902.790415V 3 Ph.
DHAD-10010012208504503.9200415V 3 Ph.
DHAD-150150131010206606250415V 3 Ph.
DHAD-200200139012206606250415V 3 Ph.
DHAD-3003001640125084010400415V 3 Ph.
DHAD-4004001840125084012400415V 3 Ph.
DHAD-6006001910136099018750415V 3 Ph.
DHAD-8008002260137098018750415V 3 Ph.
DHAD-12001200260014001400241500415V 3 Ph.
DHAD-15001500290014001400241500415V 3 Ph.
DHAD-20002000310016501650305500415V 3 Ph.
DHAD-35003500370019501950455500415V 3 Ph.
Send Enquiry for Hot Air Dryer

Get an Instant Quote

Hopper Loader

      Special Features

  • Stainless steel construction
  • Easy to operate Floor mounted panel
  • Easy cleaning & maintenance through Hinged lid
  • Tilted receiver towards operator for easy cleanout
  • Large discharge for fast material dumping
  • Inbuilt filters/cyclone to prevent solid contamination inside blower
  • Equipped with inbuilt audible and visual alarm for fault indication
  • Inbuilt safety for blower motor against overload
  • Microprocessor/PLC controller for trouble free access
  • Food grade wire braided antistatic hose for material conveying
  • Different categories of receiver options available depending upon the application
  • Suitable for silos & Central Conveying System
  • Equipped with most reliable & maintenance free blower
 

      Optional Features

  • Automatic filter cleaning
  • Automatic line cleaning
  • Ratio loading
  • Castor Wheel for panel
  • Intermediate hopper
  • Ceramic coating in receive for highly frictional materials
 

Specifications

ModelDHL2(SP)DHL7DHL14DHL28DHL85DHFL12DHFL32Model Nomenclature
Loader/Receiver Volume Liters661428851232@DHL2 - Single Phase Hopper Loader
Loader Body Diameter mm+203203304304635254381
Loader Height mm6404704756001155690900@DHL2 AB - Single Phase Hopper Loader with Ratio Valve
Material/Vacuum Line Size mm(inch)40(1.5")40-50-60 (1.5"-2"-2.5")(2.5",3",4")50-60-75 (2"-2.5"-3")
Vacuum Blower Size Kw0.90.9-1.5-2.2105-2.2-44-5.5-7.57.547.5@DHL7 MC- 3 Phase hopper loader with Manual Cleaning
Nominal Throughput kg/hr.30150-200300-600600-7501200250500@DHL7 AC- 3 Phase hopper loader with Auto Cleaning
OptionalAutomatic filter cleaning / Ratio valve / Positive discharge / Common line valve / Photo Electric Material Sensor / Intermediate Hopper
Supply Voltage 1 Ph. 230v3 Ph. 415v3 Ph. 415v3Ph.415v3 Ph. 415v3 Ph. 415v3 Ph. 415v@DHL7 AB- 3 Phase hopper loader with Ratio Valve
Compressed Air Requirement 28.3 Liters / min. @ 5.51 bars
ModelTwin LoaderTrio LoaderQuadruple Loader
Receiver size DHL-7x2DHL-7x3DHL-7x4
Vacuum Blower size - Kw1.5 / 2.202.2 / 42.2 / 4
Throughput - Kg/Hr.80x2 / 100x280x3 / 100x350x4 / 60x4
Receiver size DHL-14x2DHL-14x3DHL-14x4
Vacuum Blower size - Kw2.2 / 44 / 5.54
Throughput - Kg/Hr.100x2 / 150x2130x3 / 150x3100x4
Receiver size DHL-28x2DHL-28x3DHL-28x4
Vacuum Blower size - Kw5.5 / 7.55.5 / 7.57.5
Throughput - Kg/Hr.170x2 / 250x2170x3 / 200x3150x4
Options Automatic filter cleaning / Ratio valve / Positive discharge / Common line valve / Photo Electric Material Sensor / Intermediate hopper
Send Enquiry for Hopper Loader

Get an Instant Quote

Dehumidifier

      Special Features

  • Japan make Honeycomb rotor
  • Metal construction of Honeycomb rotor for High temperature application
  • Rock steady dew point at -50°C
  • Display of return air temperature
  • Least Operational cost due to low regeneration
  • Liner air flow across the surface of rotor
  • Tabular & low resistance heaters increase response time
  • Audible and visual alarm on fault
  • User-friendly maintenance
  • Precise (+/-3°C) adjustable dew point control (Option)
  • Temperature setback to reduce energy consumption when machine throughput is reduced or stopped.
  • In built return air after cooler
  • Uniform mass air flow ensure that each pellet is dried
  • Even air & heat distribution throughout the dryer
  • Compact & portable design with castor wheel for randomly changing machine.
  • Insulated side wall maintain temperature at desired level in hopper
  • Most compatible for PET application
  • Smooth interior surface to prevent air restriction
  • Efficient drying with minimum down time
  • Large hinged doors for easy cleaning
  • Removable spreader cones makes cleaning fast and easy
  • Sight glass for viewing material level within the hopper
  • Capabilities to offer Central dryer with multiple resin or quick change over of different material
 

      Optional Features

  • Volatile trap
  • Pre-cooler
  • Pneumatic slide gate valve
  • Butter Fly Valve at Hopper outlet
  • Drawer Magnet
  • Dew Point Monitor/Control
  • Filter Sensor
 

Specifications

Model Process (m³/hr) Process Blower (Kw) Process Heater (Kw) Optional Regen Blower (Kw) Regen Heater (Kw) Pipe Dia (inch) Total Load in Kw Dimensions
H(mm) W(mm) D(mm) Weight(Kw)
DM-50500.440.2532"81670560620120
DM-80800.7560.253.52"101670560620120
DM-1201200.75100.253.52"141730650800140
DM-1501501.5100.442.5"161730650800215
DM-2002001.5150.45.42.5"2219707001140225
DM-3003002.4150.7563"2419707001140240
DM-4004003.75300.757.23"4219707501300280
DM-5005005.5451.5104"6219707501300290
DM-7007005.5601.5104"77215010001800300
DM-100010009602.4155"86215010001800400
DM-150015009 x 2903.4206"131215015001800510
DM-2000200013 x 21205.5208"171215015001800630
DM-3000300013 x 31807.5308"256264016002160760
Send Enquiry for Dehumidifier

Get an Instant Quote

Volumetric Feeder

      Special Features

  • Robust construction and user friendly design equipped with stepper motor for high accuracy and repeatability
  • Easy clean out with hinged motor assembly.
  • Detachable hopper for quick change of additives.
  • Five options of screw for different sizes of master batch & different flow ratio.
  • High temperature working capacity for Indian condition.
  • PLC based control equipped with 5” color touch screen display for quick access to settings & parameters
  • Easy to synchronize with machine.
  • Inbuilt different modes of program like injection, extrusion or blow molding
  • No additional signal converters are required for extrusion machines.
  • Accuracy & stability of dozing is maintained due to stepper motor having minimum rotation of 0.4°C it also maintains controllable speed within tolerance of 0.4 RPM.
  • Dosing capacity from 0.04Kg./Hr. to 73Kg./Hr.
  • Additive is added directly into the center of the main material flow due to its perfect mechanical placement.
  • Clean in less than 60 seconds.
  • Due to provision of optional cooling water circulation adapter, this design offers most suitable isolation to master batch from high temp. of pre heated material, preventing thermal degradation of master batches.
 

      Optional Features

  • Special screw for feeding regrind material
  • Dual dosing Unit
  • Material level sensor
  • 5’ discharge base
  • Cooling jacket on feeding throat
  • Inline and offset inter-mixer
  • Can be equipped with hopper material level sensor.
 

Specifications

Hopper Capacity (Liter)20CodeDescriptionDosing capacity kg/hourDosing capacity Gram/Sec.
A475Auger 13/8 x 1/40,04 to 3,60.011 to 1
B150Auger 13/8 x 3/80,07 to 7,000.019 to 1.94
C455Auger 11/2 x 1/20,20 to 10,90.058 to 3.028
D220Auger 13/4 x 3/40,5 to 33.00.138 to 9.166
E165
F540Auger 11 x 10,5 to 73.01.1 to 20
Feeder Weight (kg)19
Control Panel Dimension (mm)
Height300
Width230
Depth160
Supply Voltage (50/60 Hz)230v Ac
Total Running Amps1A
Send Enquiry for Volumetric Feeder

Get an Instant Quote

Mould Temperature Controller

      Special Features

  • Equipped with PID controller for precise control
  • Oil based system for maximum 180°C
  • Pump with high flow and pressure for best performance
  • Auto refilling available for Water based unit
  • Audible and visual alarm on fault
  • Overload protection of Pump
  • Closed loop electric control circuit to prevent temperature over shoot
  • All fluid contact points are non-ferrous
  • User friendly control
  • Level sensor to prevent dry running of Pump
  • Equipped with live operation indicator lamp
 

      Special Features

  • Solenoid valves in inlet & outlet
  • Fluid distribution manifold
  • High temperature steel braided hose
  • High cooling capacity & indirect cooling in water-based system up to 70Kw
 

Specifications

ModelCirculating MediaHeating Capacity (Kw)Max. Temp. (°C)Nominal Cooling Capacity (Kw)Pump Pressure (Bar)Pump Motor (Kw)Flow Rate (LPM)Tank Volume (Ltr.)Weight (Kg.)
DMTC-0-3Oil3180203.80.5651660
DMTC-0-6Oil6180203.80.5651660
DMTC-0-9Oil9180203.80.5651660
DMTC-0-12Oil121802852.210045100
DMTC-0-18Oil181802852.215045120
DMTC-W-3Water395203.80.5651660
DMTC-W-6Water695203.80.5651660
DMTC-W-9Water995203.80.5651660
DMTC-W-12Water12952852.210045100
DMTC-W-18Water18952852.215045120
Operating Voltage415v, 50 Hz, 3 Phase with Neutral and Earthing
Control Voltage230v
Send Enquiry for Mould Temperature Controller

Get an Instant Quote

Flake Cutter

      Special Features

  • Flake cutter blades are suitable for recycling and restoring of conventional sheets, Tube plastics, profiles, packaging plastics, extrusion mold products and runners etc.
  • DSG F series granulators are adopted with sealed bearings which can handle long hour operation. The unique design of the cutter ensures the uniform cutting.
  • Over load protection of motor.
  • Rotary & Stationery blade for uniform grinding
  • Detachable screen & material bin for easy clean out
  • Openable cutting chamber
  • Easy to use with conveyor belt
  • Thermally treated blades for long life
  • Easy to grind material of minimum thickness 20 microns
 

      Optional Features

  • Customized screen mesh
  • Conveyor belt for material feeding
  • Sound proofing
  • Powder separation kit
  • Cooling options for cutting chamber
  • Cyclone separator with material bin for material collection
 

Specifications

ModelDSG-F
230
DSG-F
300
DSG-F
400
DSG-F
500
DSG-F
600
DSG-F
800
DSG-F
960
DSG-F
1100
DSG-F
1200
Grinding Chamber (mm)230x200310x200410x240510x300610x330815x470960x6101100x8001200x800
Grinding Capacity (Kg./H)100-150150-200200-250300-350350-450450-600800-10001000-12001000-1500
Stationary Cutter222244444
Rotary Cutter6912151824303336
Mesh Size (mm)888101010121212
Kw45.57.5111522/3037/45/577575
HP57.510152030/4050/60/75100100
Dimensions (LxWxH)890x640x11451010x715x13001010x815x13301290x975x16701290x1075x17401735x1525x21801950x1760x27402510x2060x37002510x2100x3700
Dimensions SP (LxWxH)1200x870x15101320x840x15801320x940x16401640x1080x19801940x1180x20501850x1540x26802050x1850x28602590x2230x36102590x2230x3610
Approx N.W. for (Kg.)2904355009009702000300060006500
Approx N.W. for SP (Kg.)40043560490011802380350065006800
Maximum Cutting Thickness (mm)4567810141415
Send Enquiry for Flake Cutter

Get an Instant Quote

 

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name